AGIP BLASIA S

  www.patrakiumbara.com

INDUSTRIAL GEAR AND CHAIN OILS

AGIP BLASIA S

Spesification
	AGIP BLASIA S oils meet the requirement of the following specifications : ISO-L-CKD DIN 51502 PGLP ANSI/AGMA D9005-D94 (AGMA NR. 4S, 5S, 6S)
	Description
	AGIP BLASIA S is formulated from a base with inherently good lubricating capacity. The very high viscosity index minimez change in  viscosity over a wide range of operating temperatures. It has exceptional oxidation and thermal stability. The additive have been selected to avoid the formation of sludge even if small part of the fluid oxidized owing to extreme working conditions. AGIP BLASIA S has very good antiwear and EP properties; the grade ISO VG 220 passes 12th stage in FZG test. It provides very good protection against rust and corrosion.

AGIP BLASIA S is an oil developed for the lubrication of gears and bearings operating at
high temperatures. It is formulated from a synthetic base (polyglycol) additive-treated to
impart appropriate antioxidant, antirust and antiwear properties.

CHARACTERISTICS (TYPICAL FIGURES)
AGIP BLASIA S
Characteristics ASTM Unit
ISO VG GRADE 150 320
Density at 15°C D 4052 kg/l 1.000 1.030
Viscosity at 100°C D 445 mm2/s 24.6 46.3
Viscosity at 40°C D 445 mm2/s 152 320
Viscosity Index D 2270 195 205
Flash Point, COC D 92 °C 240 240
Pour Point D 97 °C -36 -33
PROPERTIES AND PERFORMANCES
􀂃 AGIP BLASIA S is formulated from a base with inherently good lubricating capacity. The
very high viscosity index minimez change in viscosity over a wide range of operating
temperatures.
􀂃 It has exceptional oxidation and thermal stability. The additive have been selected to
avoid the formation of sludge even if small part of the fluid oxidized owing to extreme
working conditions.
􀂃 AGIP BLASIA S has very good antiwear and EP properties; the grade ISO VG 220 passes
12th stage in FZG test.
􀂃 It provides very good protection against rust and corrosion.
SPECIFICATIONS
AGIP BLASIA S oils meet the requirement of the following specifications :
􀂃 ISO-L-CKD
􀂃 DIN 51502 PGLP
􀂃 ANSI/AGMA D9005-D94 (AGMA NR. 4S, 5S, 6S)
APPLICATION
AGIP BLASIA S is best used for the lubrication of bearings calendars operating at high
temperatures (glassforming machines, steelstrip mills, furnace and ceramic and paper
making machinery). Suitable for continuous bulk temperatures up to 120°C with peaks in
the hottest points up to 200°C. the exceptional properties of this synthetic oil result in
reduced maintenance costs, for example where it is used for the lubrication of gears
subjected to medium loads or those requiring a low coefficient of friction for troublefree
operation, such as worm gears.

NOTES
AGIP BLASIA S is not compatible with mineral oils and same types of esthers.
AGIP BLASIA S does not attack rubber but it should not be used in contact with paintwork
unless this has an epoxy base.
APPROVAL
AGIP BLASIA S 320 is approved by SCHINDLER.

Marketing Office