AGIP BLASIA SX

INDUSTRIAL GEAR AND CHAIN OILS

  AGIP BLASIA SX

Spesification
	AGIP BLASIA SX oils meet the requirement of the following specifications : ISO 6743-6/CKT ANSI/AGMA D9005 D94, AGMA No. 3S, 5S, 6S DIN 51517 T.3/CLP 100, 220, 320
	Description
	AGIP BLASIA SX is formulated from a base with inherently good lubricating capacity. Thevery high viscosity index minimez change in  viscosity over a wide range of operating temperatures. It has exceptional oxidation and thermal stability. The additives have been selected to avoid the formation of sludge even if small part of the fluid oxidized owing to extreme working conditions. AGIP BLASIA SX has very good antiwear properties as illustrated by FZG test (12+ stage pass). It provides very good protection against rust and corrosion.

AGIP BLASIA SX is an oil developed for the lubrication of gears and bearings operating at
high temperatures. It is formulated from a synthetic base (polyalphaolefin) additive-treated
to impart appropriate antirust, antiwear properties and exceptional oxidation and thermal
stability.

CHARACTERISTICS (TYPICAL FIGURES)
AGIP BLASIA SX

Characteristics ASTM Unit
ISO VG GRADE 320
Density at 15°C D 4052 kg/l 0.850
Viscosity at 100°C D 445 mm2/s 31
Viscosity at 40°C D 445 mm2/s 316
Viscosity Index D 2270 135
Flash Point, COC D 92 °C 250
Pour Point D 97 °C -33
PROPERTIES AND PERFORMANCES
􀂃 AGIP BLASIA SX is formulated from a base with inherently good lubricating capacity. The
very high viscosity index minimez change in viscosity over a wide range of operating
temperatures.
􀂃 It has exceptional oxidation and thermal stability. The additives have been selected to
avoid the formation of sludge even if small part of the fluid oxidized owing to extreme
working conditions.
􀂃 AGIP BLASIA SX has very good antiwear properties as illustrated by FZG test (12+ stage
pass).
􀂃 It provides very good protection against rust and corrosion.
SPECIFICATIONS
AGIP BLASIA SX oils meet the requirement of the following specifications :
􀂃 ISO 6743-6/CKT
􀂃 ANSI/AGMA D9005 D94, AGMA No. 3S, 5S, 6S
􀂃 DIN 51517 T.3/CLP 100, 220, 320
APPLICATION
AGIP BLASIA SX is best used for the lubrication of bearings of marine separators, gears
operating at high temperatures (glassforming machines, steelstrip mills, furnace and
ceramic and paper making machinery). Suitable for continuous bulk temperatures up to
120°C with peaks in the hottest points up to 200°C.
APPROVAL
AGIP BLASIA SX 320 is approved by Alfa Laval.