AGIP ACER

 www.patrakiumbara.com

INDUSTRIAL HYDRAULIC OILS

AGIP ACER

AGIP ACER oils are high quality oils for use in circulation systems and in hydraulics circuits.
They are obtained from selected paraffinic base stocks treated with antioxidant and antirust
additives (R & O oils, ISO-L-DAB, ISO-L-HL classifications). They are available in many
grades that cover a very broad range of viscosity and are therefore able to meet all
requirements of practical interest.

CHARACTERISTICS (TYPICAL FIGURES)
AGIP ACER
Characteristics ASTM Unit
ISO VG GRADE 10 32 68 100 150 220 320
Density at 15°C D 4052 kg/l 0.849 0.869 0.876 0.878 0.886 0.890 0.895
Viscosity at 100°C D 445 mm2/s 2.8 5.4 8.7 11.3 15 18 24.1
Viscosity at 40°C D 445 mm2/s 10.6 31.3 65.3 98 150.4 206.6 312.2
Viscosity Index D 2270 108 105 106 101 100 98 98
Flash Point, COC D 92 °C 148 214 228 242 274 280 286
Pour Point D 97 °C -18 -18 -15 -15 -12 -12 -9
PROPERTIES AND PERFORMANCES
􀂃 AGIP ACER oils have a high viscosity index which minimizes changes in viscosity and
hence in the load bearing capacity of the lubricant film over a wide range of operating
temperatures.
􀂃 Their outstanding antifoam properties and capacity to release entrained air rapidly ensure
excellent incompressibility. This property, which is required by hydraulic fluids, prevents
any pumping and circulation troubles, and reduces the rate of thermal and oxidation
alteration.
􀂃 All grades have good anti-rust properties and oxidation stability and also aging
resistance.
􀂃 All grades posses good water-separability ability and so do not form stable emulsions,
with consequent loss of lubricating power.

SPECIFICATIONS
AGIP ACER products is approved or meet requirements of the following specifications :
􀂃 ISO-L-HL
􀂃 ISO-L-DAB
􀂃 DIN 51056 VBL
􀂃 DIN 51524 TEIL 1 HL
􀂃 CETOP RP 91H HL
􀂃 DENISON HF 1A
􀂃 BS4231 HSC
􀂃 AFNOR NF E 48603 H