AGIP ACER

 www.patrakiumbara.com

INDUSTRIAL HYDRAULIC OILS

AGIP ACER

AGIP ACER oils are high quality oils for use in circulation systems and in hydraulics circuits.
They are obtained from selected paraffinic base stocks treated with antioxidant and antirust
additives (R & O oils, ISO-L-DAB, ISO-L-HL classifications). They are available in many
grades that cover a very broad range of viscosity and are therefore able to meet all
requirements of practical interest.

CHARACTERISTICS (TYPICAL FIGURES)
AGIP ACER
Characteristics ASTM Unit
ISO VG GRADE 10 32 68 100 150 220 320
Density at 15°C D 4052 kg/l 0.849 0.869 0.876 0.878 0.886 0.890 0.895
Viscosity at 100°C D 445 mm2/s 2.8 5.4 8.7 11.3 15 18 24.1
Viscosity at 40°C D 445 mm2/s 10.6 31.3 65.3 98 150.4 206.6 312.2
Viscosity Index D 2270 108 105 106 101 100 98 98
Flash Point, COC D 92 °C 148 214 228 242 274 280 286
Pour Point D 97 °C -18 -18 -15 -15 -12 -12 -9
PROPERTIES AND PERFORMANCES
􀂃 AGIP ACER oils have a high viscosity index which minimizes changes in viscosity and
hence in the load bearing capacity of the lubricant film over a wide range of operating
temperatures.
􀂃 Their outstanding antifoam properties and capacity to release entrained air rapidly ensure
excellent incompressibility. This property, which is required by hydraulic fluids, prevents
any pumping and circulation troubles, and reduces the rate of thermal and oxidation
alteration.
􀂃 All grades have good anti-rust properties and oxidation stability and also aging
resistance.
􀂃 All grades posses good water-separability ability and so do not form stable emulsions,
with consequent loss of lubricating power.

SPECIFICATIONS
AGIP ACER products is approved or meet requirements of the following specifications :
􀂃 ISO-L-HL
􀂃 ISO-L-DAB
􀂃 DIN 51056 VBL
􀂃 DIN 51524 TEIL 1 HL
􀂃 CETOP RP 91H HL
􀂃 DENISON HF 1A
􀂃 BS4231 HSC
􀂃 AFNOR NF E 48603 H

AGIP OSO

 www.patrakiumbara.com

INDUSTRIAL HYDRAULIC OILS

AGIP OSO

Spesification
	AGIP OSO products meet requirements of the following specifications : DIN 51524 TEIL 2 HLP AFNOR NF E 48603 HM CETOP RP 91 H HM  DENISON HF-0 VDMA 24318 BS 4231 HSD  ISO-L-HM
	Description
	The oils are designed for energy transmission in plants requiring the use of a hydraulic fluid. The oils also provide adequate lubrication by creating a strong lubricant film that withstands high loads between the sliding parts of high-pressure hydraulic systems. AGIP OSO oils have very good anti-wear properties, as illustrated by typical test results : Vane and ring wear in the Vickers test around 35 mg The higher grades (OSO 46-150) passes the 12th stage of the FZG test, while the lower grades passes 11th stage. They have extremely good oxidation resistance and stability even when subjected to unusually high thermal stresses, this property minimizes sludge and deposit formation, thus preventing blocking of ports, valves, and controls, while guaranteeing that the oil remains properly fluid.  Maintenance costs are therefore reduced and the useful service life of the oil is extended. The high Viscosity index of all grades minimizes changes in viscosity throughout the normal range of operating temperatures, thus ensuring constant flow, low friction loss, and good hydraulic efficiency, while protecting against the possibility of cavitation. Their outstanding anticorrosion  and antirust properties inhibit the oxidation of internal surfaces of hydraulic circuits and therefore prevent operating difficulties and breakdown of the oil caused by metallic oxides that would otherwise form within the machinery. Their good demulsibility prevents the formation of a stable emulsion between the oil and any water that enters the system through leakage or condensation. The fluids therefore maintain their lubricating power and anticorrosion performance even under these circumstances. Their antifoam properties and their ready release of entrained air prevent difficulties with pumps  and controls which can cause irregularities in performance and other problems arising from the compressibility of air bubbles. They show a very high filterability,  they are suitable for very fine filters (3 micron up to ISO VG 68)

AGIP OSO is the trademark of a line of high quality hydraulic oils specially developed for
use in all types of hydraulic systems and equipment. The oils are formulated from selected
paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives (ISO-LHM).
These oils are available in a wide range of viscosity to suit all practical requirements.

CHARACTERISTICS (TYPICAL FIGURES)
AGIP OSO

Characteristics ASTM Unit
ISO VG GRADE 32 46 68 100 150
Density at 15°C D 4052 kg/l 0.870 0.875 0.879 0.887 0.889
Viscosity at 100°C D 445 mm2/s 5.36 7.75 8.55 11.3 15
Viscosity at 40°C D 445 mm2/s 31 46 65.5 98 150
Viscosity Index D 2270 102 100 101 101 100
Flash Point, COC D 92 °C 220 226 240 246 250
Pour Point D 97 °C -27 -21 -21 -21 -21
PROPERTIES AND PERFORMANCES
􀂃 The oils are designed for energy transmission in plants requiring the use of a hydraulic
fluid. The oils also provide adequate lubrication by creating a strong lubricant film that
withstands high loads between the sliding parts of high-pressure hydraulic systems.
􀂃 AGIP OSO oils have very good anti-wear properties, as illustrated by typical test results:
o Vane and ring wear in the Vickers test around 35 mg;
o The higher grades (OSO 46-150) passes the 12th stage of the FZG test, while the
lower grades passes 11th stage.
􀂃 They have extremely good oxidation resistance and stability even when subjected to
unusually high thermal stresses, this property minimizes sludge and deposit formation,
thus preventing blocking of ports, valves, and controls, while guaranteeing that the oil
remains properly fluid.
􀂃 Maintenance costs are therefore reduced and the useful service life of the oil is extended.
􀂃 The high Viscosity index of all grades minimizes changes in viscosity throughout the
normal range of operating temperatures, thus ensuring constant flow, low friction loss,
and good hydraulic efficiency, while protecting against the possibility of cavitation.
􀂃 Their outstanding anticorrosion and antirust properties inhibit the oxidation of internal
surfaces of hydraulic circuits and therefore prevent operating difficulties and breakdown
of the oil caused by metallic oxides that would otherwise form within the machinery.
􀂃 Their good demulsibility prevents the formation of a stable emulsion between the oil and
any water that enters the system through leakage or condensation. The fluids therefore
maintain their lubricating power and anticorrosion performance even under these
circumstances.
􀂃 Their antifoam properties and their ready release of entrained air prevent difficulties with
pumps and controls which can cause irregularities in performance and other problems
arising from the compressibility of air bubbles.
􀂃 They show a very high filterability; they are suitable for very fine filters (3 micron up to
ISO VG 68)

AGIP BLASIA FMP

 www.patrakiumbara.com

INDUSTRIAL GEAR AND CHAIN OILS

AGIP BLASIA FMP

Spesification
	Description
	thermal and oxidation stability, permitting continuous use at operating temperatures as high as 120 °C; non-corrosiveness towards materials employed for the construction of machinery and especially those used for gaskets and seals, as well as metals such as steel, cast iron, copper and bronze; demulsibility: they separate rapidly from water and thus ensure perfect lubrication even in applications where water contamination is possible, as in steelmaking plants, for instance; rust protection properties: these oils effectively help, protect and conserve lubricated parts even in damp conditions; very low tendency to foaming to ensure a very good lubricating film.

P R O D U C T D A T A S H E E T
The AGIP BLASIA FMP series are very high performance gear oils for lubricating in extreme pressure conditions
(EP) the last generation industrial gear reducers, in particular, those extremely compact and of high specific power that
could have problems of micropitting damages.
They are formulated with selected paraffinic base stocks and specific additives for a very wide operative exigencies,
(ISO-L-CKD classification).
CHARACTERISTICS (TYPICAL FIGURES)
BLASIA FMP 100 150 220 320 460
Viscosity at 40°C mm²/s 97 150 221 318 446
Viscosity at 100°C mm²/s 10.7 14.6 18.8 23.9 29.7
Viscosity Index - 96 95 95 95 95
Flash Point COC °C 230 235 260 265 280
Pour Point °C -24 -21 -21 -18 -12
Mass density at 15°C kg/l 0.887 0.889 0.893 0.897 0.900
PROPERTIES AND PERFORMANC
AGIP BLASIA FMP oils have very good antiwear and EP properties as demonstrated by the following tests:
• FZG (A 8,3/90), scuffing test: pass the 12th stage;
FZG (FVA 54) – micro pitting test, load stage > 10th;
FAG FE 8 (DIN 51819-3), wear of rollers: 2mg;
Timken OK load (ASTM D 2782), 70 lbs;
4 balls EP (ASTM D 2783), last non-seizure load: 110 kg; welding load: 280kg.
AGIP BLASIA FMP oils also possess the following properties:
thermal and oxidation stability, permitting continuous use at operating temperatures as high as 120 °C;
non-corrosiveness towards materials employed for the construction of machinery and especially those used for
gaskets and seals, as well as metals such as steel, cast iron, copper and bronze;
demulsibility: they separate rapidly from water and thus ensure perfect lubrication even in applications where
water contamination is possible, as in steelmaking plants, for instance;
rust protection properties: these oils effectively help, protect and conserve lubricated parts even in damp
conditions;
very low tendency to foaming to ensure a very good lubricating film.
AGIP BLASIA FMP
Eni S.p.A.
Refining & Marketing Division
Via Laurentina 449, 00142 Rome
Standard Phone +39 06 5988.1
www.eni.com
[IN346.04.10]
Page 2 of 2
P R O D U C T D A T A S H E E T
APPLICATIONS
AGIP BLASIA FMP oils are recommended for splash or circulation lubrication of all types of enclosed gears,
especially where operating conditions involve heavy loads, high speeds and high relative sliding velocities, at elevated
ambient and operating temperatures in industrial and marine applications. They can also be used to lubricate other
heavily-loaded parts and components such as couplings, transmission screws and low speed plain and rolling bearings.
As indicated, they can be used, too, in oil-mist lubrication systems.
SPECIFICATIONS
AGIP BLASIA FMP oils are approved and/or met the requirements of the following specifications:
ISO-L-CKD
ISO 12925-1 - CKD
ANSI/AGMA 9005-D94 (AGMA 3EP, 4EP, 5EP, 6EP e 7EP)
ASLE EP
CINCINNATI MILACRON (P-77 ISO 150, P-74 ISO 220,P-35 ISO 460) level.
DAVID BROWN S1.53.101 level
DIN 51517 teil 3 – CLP
FLENDER BA 7300 Table A (ISO VG 150, 220, 320 e 460)
Müller Weingarten DT 55 005 type CLP level
U.S. STEEL 224

AGIP BLASIA SX

INDUSTRIAL GEAR AND CHAIN OILS

  AGIP BLASIA SX

Spesification
	AGIP BLASIA SX oils meet the requirement of the following specifications : ISO 6743-6/CKT ANSI/AGMA D9005 D94, AGMA No. 3S, 5S, 6S DIN 51517 T.3/CLP 100, 220, 320
	Description
	AGIP BLASIA SX is formulated from a base with inherently good lubricating capacity. Thevery high viscosity index minimez change in  viscosity over a wide range of operating temperatures. It has exceptional oxidation and thermal stability. The additives have been selected to avoid the formation of sludge even if small part of the fluid oxidized owing to extreme working conditions. AGIP BLASIA SX has very good antiwear properties as illustrated by FZG test (12+ stage pass). It provides very good protection against rust and corrosion.

AGIP BLASIA SX is an oil developed for the lubrication of gears and bearings operating at
high temperatures. It is formulated from a synthetic base (polyalphaolefin) additive-treated
to impart appropriate antirust, antiwear properties and exceptional oxidation and thermal
stability.

CHARACTERISTICS (TYPICAL FIGURES)
AGIP BLASIA SX

Characteristics ASTM Unit
ISO VG GRADE 320
Density at 15°C D 4052 kg/l 0.850
Viscosity at 100°C D 445 mm2/s 31
Viscosity at 40°C D 445 mm2/s 316
Viscosity Index D 2270 135
Flash Point, COC D 92 °C 250
Pour Point D 97 °C -33
PROPERTIES AND PERFORMANCES
􀂃 AGIP BLASIA SX is formulated from a base with inherently good lubricating capacity. The
very high viscosity index minimez change in viscosity over a wide range of operating
temperatures.
􀂃 It has exceptional oxidation and thermal stability. The additives have been selected to
avoid the formation of sludge even if small part of the fluid oxidized owing to extreme
working conditions.
􀂃 AGIP BLASIA SX has very good antiwear properties as illustrated by FZG test (12+ stage
pass).
􀂃 It provides very good protection against rust and corrosion.
SPECIFICATIONS
AGIP BLASIA SX oils meet the requirement of the following specifications :
􀂃 ISO 6743-6/CKT
􀂃 ANSI/AGMA D9005 D94, AGMA No. 3S, 5S, 6S
􀂃 DIN 51517 T.3/CLP 100, 220, 320
APPLICATION
AGIP BLASIA SX is best used for the lubrication of bearings of marine separators, gears
operating at high temperatures (glassforming machines, steelstrip mills, furnace and
ceramic and paper making machinery). Suitable for continuous bulk temperatures up to
120°C with peaks in the hottest points up to 200°C.
APPROVAL
AGIP BLASIA SX 320 is approved by Alfa Laval.

AGIP BLASIA S

  www.patrakiumbara.com

INDUSTRIAL GEAR AND CHAIN OILS

AGIP BLASIA S

Spesification
	AGIP BLASIA S oils meet the requirement of the following specifications : ISO-L-CKD DIN 51502 PGLP ANSI/AGMA D9005-D94 (AGMA NR. 4S, 5S, 6S)
	Description
	AGIP BLASIA S is formulated from a base with inherently good lubricating capacity. The very high viscosity index minimez change in  viscosity over a wide range of operating temperatures. It has exceptional oxidation and thermal stability. The additive have been selected to avoid the formation of sludge even if small part of the fluid oxidized owing to extreme working conditions. AGIP BLASIA S has very good antiwear and EP properties; the grade ISO VG 220 passes 12th stage in FZG test. It provides very good protection against rust and corrosion.

AGIP BLASIA S is an oil developed for the lubrication of gears and bearings operating at
high temperatures. It is formulated from a synthetic base (polyglycol) additive-treated to
impart appropriate antioxidant, antirust and antiwear properties.

CHARACTERISTICS (TYPICAL FIGURES)
AGIP BLASIA S
Characteristics ASTM Unit
ISO VG GRADE 150 320
Density at 15°C D 4052 kg/l 1.000 1.030
Viscosity at 100°C D 445 mm2/s 24.6 46.3
Viscosity at 40°C D 445 mm2/s 152 320
Viscosity Index D 2270 195 205
Flash Point, COC D 92 °C 240 240
Pour Point D 97 °C -36 -33
PROPERTIES AND PERFORMANCES
􀂃 AGIP BLASIA S is formulated from a base with inherently good lubricating capacity. The
very high viscosity index minimez change in viscosity over a wide range of operating
temperatures.
􀂃 It has exceptional oxidation and thermal stability. The additive have been selected to
avoid the formation of sludge even if small part of the fluid oxidized owing to extreme
working conditions.
􀂃 AGIP BLASIA S has very good antiwear and EP properties; the grade ISO VG 220 passes
12th stage in FZG test.
􀂃 It provides very good protection against rust and corrosion.
SPECIFICATIONS
AGIP BLASIA S oils meet the requirement of the following specifications :
􀂃 ISO-L-CKD
􀂃 DIN 51502 PGLP
􀂃 ANSI/AGMA D9005-D94 (AGMA NR. 4S, 5S, 6S)
APPLICATION
AGIP BLASIA S is best used for the lubrication of bearings calendars operating at high
temperatures (glassforming machines, steelstrip mills, furnace and ceramic and paper
making machinery). Suitable for continuous bulk temperatures up to 120°C with peaks in
the hottest points up to 200°C. the exceptional properties of this synthetic oil result in
reduced maintenance costs, for example where it is used for the lubrication of gears
subjected to medium loads or those requiring a low coefficient of friction for troublefree
operation, such as worm gears.

NOTES
AGIP BLASIA S is not compatible with mineral oils and same types of esthers.
AGIP BLASIA S does not attack rubber but it should not be used in contact with paintwork
unless this has an epoxy base.
APPROVAL
AGIP BLASIA S 320 is approved by SCHINDLER.

Marketing Office

AGIP BLASIA

 www.patrakiumbara.com

INDUSTRIAL GEAR AND CHAIN OILS

AGIP BLASIA

Spesification
	AGIP BLASIA oils meet the requirements of the following specifications : ISO-L-CKD ISO 12925 US STEEL 224 ANSI/AGMA 9005-D94 (AGMA 2EP, 3EP, 4EP, 5EP, 6EP, 7EP, 8EP) DIN 51517 TEIL 3 CLP CINCINNATI MILACRON DAVID BROWN S1.53.101 (5E)
	Description
	AGIP BLASIA oils have very good anti-wear and EP properties as demonstrated by the following tests : FZG  : pass the 12th stage level TIMKEN : OK LOAD 60 lbs 4 BALL EP : 110 kg last non-seizure load 280 kg weld load  Foaming Tendency/Stability : Seq 1 : 0/0 Seq 2 : 0/0 Seq 3 : 0/0 Thermal and oxidation stability, permitting continuous use at operating temperature as high as 100 °C. Non-corrosiveness towards materials employed for the construction of machinery and especially those used for gaskets and seals, as well as metals such as steel, cast iron, copper, and bronze. Demulsibility : AGIP BLASIA oils separate rapidly from water and thus ensure perfect lubrication even in applications where water contamination is possible, as in steel-making plants for instance. Rust protection properties : These oils effectively help protect and conserve lubricated parts even in damp conditions. Toxicity : the product is non-toxic since they contain no lead compounds.

AGIP BLASIA

The AGIP BLASIA series has been developed to meet the widest range of requirements of
EP (Extreme Pressure) lubrication such as, for instance gears, operating under severe duty
(ISO-L-CKD classification).
The oils are formulated from paraffinic base stocks and additives such as sulphur
compounds (which ensure good high-speed and shock-load performance) and phosphorus
compounds (for low-speed and high-load performance). They thus satisfy the widest range
of operational requirements.

CHARACTERISTICS (TYPICAL FIGURES)
AGIP BLASIA
Characteristics ASTM Unit
ISO VG GRADE 68 100 150 220 320 460 680
Density at 15°C D 4052 kg/l 0.882 0.885 0.892 0.898 0.900 0.904 0.907
Viscosity at 100°C D 445 mm2/s 8.65 11.25 14.7 19.2 23.8 30.5 39.2
Viscosity at 40°C D 445 mm2/s 66 100 148 220 310 455 670
Viscosity Index D 2270 102 98 98 98 97 96 96
Flash Point, COC D 92 °C 226 246 256 260 262 270 240
Pour Point D 97 °C -15 -15 -15 -12 -12 -9 -6
PROPERTIES AND PERFORMANCES
􀂃 AGIP BLASIA oils have very good anti-wear and EP properties as demonstrated by the
following tests :
o FZG : pass the 12th stage level
o TIMKEN : OK LOAD 60 lbs
o 4 BALL EP :
110 kg last non-seizure load
280 kg weld load
o Foaming Tendency/Stability:
Seq 1 : 0/0
Seq 2 : 0/0
Seq 3 : 0/0
􀂃 Thermal and oxidation stability, permitting continuous use at operating temperature as
high as 100 °C.
􀂃 Non-corrosiveness towards materials employed for the construction of machinery and
especially those used for gaskets and seals, as well as metals such as steel, cast iron,
copper, and bronze.
􀂃 Demulsibility: AGIP BLASIA oils separate rapidly from water and thus ensure perfect
lubrication even in applications where water contamination is possible, as in steel-making
plants for instance.
􀂃 Rust protection properties: These oils effectively help protect and conserve lubricated
parts even in damp conditions.
􀂃 Toxicity: the product is non-toxic since they contain no lead compounds.

AGIP PUNICA 570

 www.patrakiumbara.com

AGIP PUNICA 570

Spesification
	Description
	AGIP PUNICA 570 has sufficient reserve alkalinity to efficiently prevent acidic corrosion ofliners even when high-sulphur fuels are used. The rapid rate of reaction of the alkaline additives employed guarantees quick neutralization of acid mists resulting from oxidation of the sulphur in the fuel, thus minimizing corrosion. The high thermal stability of the product ensures optimum lubrication even in the largest bore engines operating at the highest mean effective pressures. The very high detergent-dispersant characteristics prevent carbon deposits forming in the piston-ring grooves, so the rings remain free even with low-quality fuel oils. The strong lubricating film ensures minimum ring and liner wear thus reducing engine servicing requirements. The low surface tension of the product facilitates its distribution inside the liner, further reducing chemical and mechanical wear.

AGIP PUNICA 570 is formulated from a high-quality base stock, additive-treated to
guarantee superior cylinder lubrication of two-stroke crosshead diesel engines running on
residual fuel oil.

CHARACTERISTICS (TYPICAL FIGURES)
AGIP PUNICA 570
Characteristics ASTM Unit

SAE GRADE 50
Density at 15°C D 4052 kg/l 0.930
Viscosity at 100°C D 445 mm2/s 19.4
Viscosity at 40°C D 445 mm2/s 206.8
Viscosity Index D 2270 106
Flash Point, COC D 92 °C 242
Pour Point D 97 °C -18
Base Number D 2896 mg KOH/g 73.6
PROPERTIES AND PERFORMANCES
􀂃 AGIP PUNICA 570 has sufficient reserve alkalinity to efficiently prevent acidic corrosion of
liners even when high-sulphur fuels are used.
􀂃 The rapid rate of reaction of the alkaline additives employed guarantees quick
neutralization of acid mists resulting from oxidation of the sulphur in the fuel, thus
minimizing corrosion.
􀂃 The high thermal stability of the product ensures optimum lubrication even in the largest
bore engines operating at the highest mean effective pressures.
􀂃 The very high detergent-dispersant characteristics prevent carbon deposits forming in the
piston-ring grooves, so the rings remain free even with low-quality fuel oils.
􀂃 The strong lubricating film ensures minimum ring and liner wear thus reducing engine
servicing requirements.
􀂃 The low surface tension of the product facilitates its distribution inside the liner, further
reducing chemical and mechanical wear.

APPLICATION
AGIP PUNICA 570 is designed to be used on two strokes cross head marine diesel engine
running on marine fuel oil (MFO) and carefully formulated to give maximum performance,
engine protection as well as engine cleanliness.
APPROVAL
AGIP PUNICA 570 has been officially approved or accepted by the following engine
manufacturers or organizations:
􀂃 FINCANTIERI - Diesel Ricerche
􀂃 M.A.N. - B & W
􀂃 NEW SULZER DIESEL

AGIP CLADIUM S 400

 www.patrakiumbara.com

AGIP CLADIUM S 300

Spesification
	§ API SERVICE CD/SF § MIL – L – 2104 E level § MB 227.0 Quality § CCMC D4
	Description
	AGIP CLADIUM S 300 is specifically designed to be used on static diesel and marine diesel engines using diesel oil or marine fuel oil with sulphur content less than 3.5 % wt and formulated to achieve optimum engine life. AGIP CLADIUM S 300 meets requirements of the API CD specification. §  Fincantieri - Divisione Grandi Motori §  MAN - B & W. §  Mirrlees Blackstone §  New Sulzer Diesel §  Wärtsilä

AGIP CLADIUM S is a series of marine engine oils of the latest generation intended for use in those modern four-stroke diesel engines operating with high-sulphur fuels which require lubricants of higher performances, namely with "anti black sludge" properties. This lubricant provides also better deposit control in the hottest parts of the engine, namely in the piston cooling gallery. These properties are mandatory also because the modern engines show low oil consumption figures. This decreases the renewal of the oil charge by to pups, and leads to higher stress applied to the oil. The line comprises five products: CLADIUM 300 S and 400 S (offered in two viscosity grades), CLADIUM 500 S (SAE 40), with different TBN values. AGIP CLADIUM 500 S is recommended in case of use of fuel with particularly high sulphur and/ or of engines showing extremely low oil consumption.

PROPERTIES AND PERFORMANCE
 AGIP CLADIUM S have detergent-dispersant properties which effectively prevent the formation of lacquers, sludge and deposits, thus keeping rings free and pistons clean.
 They have enough alkalinity reserve to efficiently combat the formation of acid mists resulting from the use of very-high sulphur fuel oils. This reserve is also particularly useful in engines exhibiting especially low oil consumption or operating at such low liner temperatures as to favour sulphuric acid condensation.
 Their antiwear properties make this product also suitable to lubricate main engine reduction gear units.
 Their antifoam properties prevent the formation and entrainment of air bubbles.
 Their balanced dispersancy ensures a perfectly clean engine without hindering purification by centrifuging.
 Their high polarity provides superior protection of engine parts from attack by moisture and salinity.
SPECIFICATIONS AGIP CLADIUM S meet the requirements of API CF service specification and have been approved by the following manufacturers

AGIP CLADIUM 400

 www.patra-kiumbara.com

 AGIP CLADIUM 400

Spesification
	API SERVICE CF/SF MIL – L – 2104 E level MB 227.0 Quality CCMC D4 CATERPILLAR 1G2 CATERPILLAR TO-2 CATERPILLAR 1M-PC ALLISON C-4
	Description
	AGIP CLADIUM 400 has detergent-dispersant  properties that effectively prevent the formation of lacquers, sludge, and deposits, thus keeping rings free and pistons clean. It has enough alkalinity reserve to efficiently combat the formation of acid mists resulting from the use of very-high sulphur fuel oils. This reserve is also particularly useful in engines exhibiting especially low oil consumption or operating at such low liner temperatures as to favour sulphuric acid condensation. Its anti-wear properties make this product also suitable to lubricate main engine reduction gear units.  Its antifoam properties prevent the formation and entrainment of air bubbles. Its balanced dispersancy ensures a perfectly clean engine without hindering purification by centrifuging. Its high polarity provides superior protection of engine parts from attack by moisture and salinity.

AGIP CLADIUM 400 is an API CD (series III) engine oil intended for use in four-stroke diesel
engines operating with high-sulphur fuels, thus requiring a specially high TBN, and in
particular running conditions. It is specifically recommended for application in four-stroke
diesel engines operating on poor quality, high sulphur, residual fuels or frequently
experiencing low temperatures in the piston-liner area.
AGIP CLADIUM 400 is also recommended for those applications where a single product is
preferred to lubricate both engines operating on fuel oil and those running on diesel fuel.
CHARACTERISTICS (TYPICAL FIGURES)
AGIP CLADIUM 400
Characteristics ASTM Unit
SAE GRADE
30 40
Density at 15°C D 4052 kg/l 0890 0.910
Viscosity at 100°C D 445 mm2/s 11.5 15.3
Viscosity at 40°C D 445 mm2/s 100 156
Viscosity Index D 2270 102 99
Flash Point, COC D 92 °C 240 240
Pour Point D 97 °C -9 -12
Base Number D 2896 mg KOH/g 43 43
PROPERTIES AND PERFORMANCES
􀂃 AGIP CLADIUM 400 has detergent-dispersant properties that effectively prevent the
formation of lacquers, sludge, and deposits, thus keeping rings free and pistons clean.
􀂃 It has enough alkalinity reserve to efficiently combat the formation of acid mists resulting
from the use of very-high sulphur fuel oils. This reserve is also particularly useful in
engines exhibiting especially low oil consumption or operating at such low liner
temperatures as to favour sulphuric acid condensation.
􀂃 Its anti-wear properties make this product also suitable to lubricate main engine
reduction gear units.
􀂃 Its antifoam properties prevent the formation and entrainment of air bubbles.
􀂃 Its balanced dispersancy ensures a perfectly clean engine without hindering purification
by centrifuging.
􀂃 Its high polarity provides superior protection of engine parts from attack by moisture and
salinity.
SPECIFICATIONS
􀂃 API SERVICE CD/SF
􀂃 MIL – L – 2104 E level
􀂃 MB 227.0 Quality
􀂃 CCMC D4

AGIP CLADIUM 200

www.greasepelumas.com

 

Spesification
	API SERVICE CD/SF MIL – L – 2104 E level MB 227.0 Quality CCMC D4 CATERPILLAR 1G2 CATERPILLAR TO-2 CATERPILLAR 1M-PC ALLISON C-4
	Description
	AGIP CLADIUM 200 has excellent detergent  properties, which effectively prevent formation of lacquer, and carbon deposits on piston lands and grooves, thus keeping the rings free even in the most highly-rated engines. Its anti-corrosion properties provide efficient, long-term protection of liners. Its TBN retention properties remain high even after extended use, thus ensuring effective neutralization of acidic products. Its very good anti-wear properties ensure the life of all sliding parts. Its antifoam properties prevent breakdown  of the oil film, thus ensuring superior hydrodynamic lubrication of moving parts. Despite its high detergent-dispersant efficiency, the demulsibility characteristics allow rapid separation of water accidentally entering the engine.

AGIP CLADIUM 200

AGIP CLADIUM 200 is an API CD (series III) lubricant specifically formulated for naturally-aspirated or even highly supercharged marine, industrial and locomotive diesel engines.
Its additive package is suitably balanced in order to permit the use of either gas oil or marine diesel fuels, while ensuring top performance in engines with very high mean effective pressures.
CHARACTERISTICS (TYPICAL FIGURES)
AGIP CLADIUM 200
SAE GRADE 40
Characteristics ASTM Unit
Density at 15°C D 4052 kg/l 0.900
Viscosity at 100°C D 445 cSt 15.3
Viscosity at 40°C D 445 cSt 156
Viscosity Index D 2270 99
Flash Point, COC D 92 °C 260
Pour Point D 97 °C -12
Base Number D 2896 mg KOH/g 22
Sulphated Ash D 874 % wt 2.8
PERFORMANCE LEVEL
API SERVICE CD/SF
MIL – L – 2104 E level
MB 227.0 Quality
CCMC D4
CATERPILLAR 1G2
CATERPILLAR TO-2
CATERPILLAR 1M-PC
ALLISON C-4
TECHNICAL ADVANTAGE
AGIP CLADIUM 200 has excellent detergent properties, which effectively prevent formation of lacquer, and
carbon deposits on piston lands and grooves, thus keeping the rings free even in the most highly-rated
engines.
Its anti-corrosion properties provide efficient, long-term protection of liners.
Its TBN retention properties remain high even after extended use, thus ensuring effective neutralization of
acidic products.
Its very good anti-wear properties ensure the life of all sliding parts.
Its antifoam properties prevent breakdown of the oil film, thus ensuring superior hydrodynamic lubrication of
moving parts.
Despite its high detergent-dispersant efficiency, the demulsibility characteristics allow rapid separation of
water accidentally entering the engine.
APPLICATION
AGIP CLADIUM 200 is specifically designed to be used on static diesel and marine diesel engines using diesel oil or
marine fuel oil with sulphur content less than 2.5 % wt and formulated to achieve optimum engine life.
APPROVAL
AGIP CLADIUM 200 meets requirements of the API CD specification.
Fincantieri - Divisione Grandi Motori
MAN - B & W.
Mirrlees Blackstone
New Sulzer Diesel
Wärtsilä

AGIP CLADIUM 120

 www.patrakiumbara.com

AGIP CLADIUM 120

Spesification
	API SERVICE CD
	Description
	AGIP CLADIUM 120 has excellent detergent  properties, which effectively prevent formation of lacquer, and carbon deposits on piston lands and grooves, thus keeping the rings free even in the most highly-rate engines. Its TBN retention properties remain high even after extended use, thus ensuring effective neutralization of acidic products. Its anti-corrosion properties provide efficient, long-term protection of liners. Despite its high detergent-dispersant efficiency, the demulsibility characteristics allow rapid separation of water accidentally entering the engine. Its very good anti-wear properties ensure the life of all sliding parts. Its antifoam properties prevent breakdown  of the oil film, thus ensuring superior hydrodynamic lubrication of moving parts.

AGIP CLADIUM 120 is an API CD (series III) lubricant specifically formulated for naturally aspirated or even highly supercharged marine, industrial and locomotive diesel engine.
Its additive package is suitably balanced in order to permit the use of either gas oil or
marine diesel fuels, while ensuring top performance in engines with very high mean
effective pressures.
CHARACTERISTICS (TYPICAL FIGURES)
AGIP CLADIUM 120
Characteristics ASTM Unit
SAE GRADE 30 40
Density at 15°C D 4052 kg/l 0890 0.896
Viscosity at 100°C D 445 mm2/s 11.5 16
Viscosity at 40°C D 445 mm2/s 100 166.6
Viscosity Index D 2270 102 99
Flash Point, COC D 92 °C 246 266
Pour Point D 97 °C -9 -12
Base Number D 2896 mg KOH/g 12.5 12.5
PROPERTIES AND PERFORMANCES
􀂃 AGIP CLADIUM 120 has excellent detergent properties, which effectively prevent
formation of lacquer, and carbon deposits on piston lands and grooves, thus keeping the
rings free even in the most highly-rate engines.
􀂃 Its TBN retention properties remain high even after extended use, thus ensuring effective
neutralization of acidic products.
􀂃 Its anti-corrosion properties provide efficient, long-term protection of liners.
􀂃 Despite its high detergent-dispersant efficiency, the demulsibility characteristics allow
rapid separation of water accidentally entering the engine.
􀂃 Its very good anti-wear properties ensure the life of all sliding parts.
􀂃 Its antifoam properties prevent breakdown of the oil film, thus ensuring superior
hydrodynamic lubrication of moving parts.
SPECIFICATIONS
􀂃 API SERVICE CD
APPLICATION
AGIP CLADIUM 120 is specifically designed for static diesel and marine diesel engines and
formulated to achieve optimum engine life as well.

Info Harga dan Spesifikasi Agip Lubricants

Informasi Produk Pelumas AGIP 

 www.patrakiumbara.com

 Contact Us :

  Hotline : 021-7084-1999

Oli pelumas merek AGIP merupakan hasil inovasi teknologi tiada henti dalam bidangnya sebagai hasil dedikasi tinggi dalam aktivitas penelitian dan pengembangan (R & D) serta penerapan standar internasional tertinggi dalam menghasilkan produk berkelas dunia yang diakui secara luas. Agip memiliki komitmen tinggi di setiap aspek pemurnian minyak bumi dan pencampurannya (blending), demi rentang kualitas yang ketat menyangkut formulasi, produksi dan control, bahkan hingga penelitian akan teknologi baru mengenai konservasi serta penggunaan peralatan-peralatan canggih nan hemat energy. Dedikasi Agip dalam penelitian untuk memperoleh keseimbangan dalam menentukan penggunaan berbagai jenis minyak dasar (base oil) dari berbagai sumber memberikan fleksibilitas tak terbatas, disertai dengan standar mutu yang tinggi atas produk yang dihasilkan.

Beberapa kecanggihan Agip diantaranya seperti Laboratorium Quality Assurance yang memiliki peralatan termutakhir dan terlengkap seperti ICP (Induced Coupled Plasma), FTIR (Fourier Transform Infrared Spectrometry), CCS (Cold Cranking Simulator) dan sebagainya, memastikan agar produk yang diproduksi diuji melalui prosedur control kualitas yang ketat sesuai standar internasional yang berlaku.

Produk-produk Pelumas Agip berbagai pengaplikasian

Automotive Gear Oil & Transmission – 200ltr/Drum
Agip Rotra MP 90 – Kinerja SAE 90 GL 5
Agip Rotra MP 140 – Kinerja SAE 140 GL 5
Agip Rotra HY – Kinerja SAE 90 GL 4
Agip ATF 2 D – Dexron II

R & O – 200ltr/Drum
Agip Acer 10 – Kinerja ISO VG 10
Agip Acer 32 – Kinerja ISO VG 32
Agip Acer 68 – Kinerja ISO VG 68
Agip Acer 100 – Kinerja ISO VG 100
Agip Acer 150 – Kinerja ISO VG 150
Agip Acer 220 – Kinerja ISO VG 220

Automotive Engine Oil – 200Ltr/Drum
Agip Diesel Sigma 10W – Kinerja SAE 10W TBN 11 CD/SE
Agip Diesel Sigma 30 – Kinerja SAE 30 TBN 11 CD/SE
Agip Diesel Sigma 40 – Kinerja SAE 40 TBN 11 CD/SE
Agip Diesel Sigma 50 – Kinerja SAE 50 TBN 11 CD/SE
Agip Diesel Sigma Plus 10W – Kinerja 10W TBN 11 CF/SF
Agip Diesel Sigma Plus 30 – Kinerja 30 TBN 11 CF/SF
Agip Diesel Sigma Plus 40 – Kinerja 40 TBN 11 CF/SF
Agip Diesel Sigma Plus 50 – Kinerja 50 TBN 11 CF/SF
Agip Diesel Super Multigrade 15W-40 – Kinerja SAE 15W-40 TBN 11 CF-4/SG
Agip Diesel Super Multigrade 20W-50 – Kinerja SAE 20W-50 TBN 11 CF-4/SG
Agip Sigma Turbo Plus 15W-40 – Kinerja SAE 15W-40 TBN 11 CI-4/SL
Agip Super Motor Oil 20W-50 – Kinerja SAE 20W-50 SG/CD
Agip Super SL Motor Oil 20W-50 – Kinerja SAE 20W-50 SL
Agip Formula 2000 10W-40 – SAE 10W-40 SL/CF
Agip 4T Super – Kinerja SAE 20W-50SG

Heat Transfer Oil (Diathermic) – 200ltr/Drum
Agip Therm Oil 2
Agip Therm Oil 3
Agip Therm Oil XT

Hydraulic Fluid – 200Ltr/Drum
Agip OSO 32 – Kinerja ISO VG 32
Agip OSO 46 – Kinerja ISO VG 46
Agip OSO 68 – Kinerja ISO VG 68
Agip OSO 100 – Kinerja ISO VG 100
Agip Arnica 32 – Kinerja ISO VG 32
Agip Arnica 46 – Kinerja ISO VG 46
Agip Arnica 46/I – Kinerja ISO VG 46
Agip Arnica 68/I – Kinerja ISO VG 68

Gear Oil – 200ltr/Drum
Agip Blasia 68 – ISO VG 68
Agip Blasia 100 – ISO VG 100
Agip Blasia 150 – ISO VG 150
Agip Blasia 220 – ISO VG 220
Agip Blasia 320 – ISO VG 320
Agip Blasia 460 – ISO VG 460
Agip Blasia 680 – ISO VG 680

Marine & Stationary Diesel Engines – 200ltr/Drum
Agip Punica 570 – Kinerja SAE 50 TBN 70
Agip Cladium/I 50 30 – Kinerja SAE 30 TBN 5 CD
Agip Cladium/I 120 30 – Kinerja SAE 30 TBN 12 CD
Agip Cladium/I 120 40 – Kinerja SAE 40 TBN 12 CD
Agip Cladium/I 200 40 – Kinerja SAE 40 TBN 20 CD
Agip Cladium/I 300 30 – Kinerja SAE 40 TBN 30 CD
Agip Cladium/I 300 40 – Kinerja SAE 40 TBN 30 CD
Agip Cladium/I 400 40 – Kinerja SAE 40 TBN 40 CD

Grease – Unit Of Sales
Agip 33 FD – 15 Kg/3 X SKG CAN
Agip 33 FD – 18 Kg/Pail
Agip 33 FD – 180 Kg/Drum
Agip AC 2 – 18 Kg/Pail
Agip SP GR MU 00 – 18 Kg/Pail
Agip MU 2 – 18 kg/Pail
Agip MU EP 1 – 18 Kg/Pail
Agip MU EP 1 – 180 Kg/Drum
Agip MU EP 2 – 18 Kg/Pail
Agip MU EP 2 – 180 Kg/Drum
Agip MU EP 3 – 18 Kg/Pail
Agip MU EP 3 – 180 Kg/Drum
Agip Sagus 60 – 18 Kg/Pail
Agip Sagus 60 – 180 Kg/Pail
Agip SM 2 – 18 Kg/Pail
Agip SM 2 – 180 Kg/Drum
Agip LP 2 – 18 Kg/Pail
Agip NF2 – 18 Kg/Pail
Agip GR VN – 18 Kg/Pail
Agip Grease LC 2 – 18 Kg/Pail

Other Agip Oils – Unit of Sales
Agip 7921 – 18 Kg/Pail
Agip Acer MP 460 – 180 Kg/Drum
Agip Alisma 32 PV – 180 Kg/Drum
Agip Aquamet 104 – 180 Kg/Drum
Agip Aquamet 205 – 180 Kg/Drum
Agip Aquamet S 600 BS – 18 Kg/Pail
Agip Aquamet S 600 BS – 180 Kg/Drum
Agip Arnica 104/FR – 180 Kg/Drum
Agip Arum HT 220 – 18 Kg/Pail
Agip Betula S 68 – 18 Kg/Pail
Agip Blasia P 2200 – 180 Kg/Drum
Agip Blasia S 320 – 18 Kg/Drum
Agip Blasia SX 320 – 18 Kg/Pail
Agip Dicrea 100 – 18 Kg/Pail
Agip Dicrea 32 – 18 Kg/Pail
Agip Dicrea 46 – 18 Kg/Pail
Agip Dicrea 68 – 18 Kg/Pail
Agip Dicrea 68 – 180 Kg/Drum
Agip Dicrea SX 46 – 18 Kg/Pail
Agip Dicrea SX 68 – 18 Kg/Pail
Agip Dicrea SX 68 – 180 Kg/Pail
Agip Exidia HG 220 – 18 Kg/Pail
Agip Exidia HG 220 – 180 Kg/Drum
Agip Exidia HG 68 – 18 Kg/Pail
Agip Ote 32 – 180 Kg/Drum
Agip Ote 32 GT – 180 Kg/Drum
Agip Ote 46 – 18 Kg/Pail
Agip Ote 46 – 180 Kg/Pail
Agip Ote 68 – 18 Kg/Pail
Agip Ote 68 – 180 Kg/Pail
Agip Ote TCA 46/A – 18 Kg/Pail
Agip Rustia 100/F – 18 Kg/Pail
Agip VAS 900 – 180 Kg/Drum

Untuk Informasi dan Pemesanan please Call

Hotline : 021-7084-1999
Email   : sales.patrakiumbara@live.com