www.patrakiumbara.com
 |
| INDUSTRIAL GEAR AND CHAIN OILS |
AGIP BLASIA FMP
| Spesification |
|
|
|
|
|
Description |
|
- thermal and oxidation stability, permitting continuous use at operating temperatures as high as 120 °C;
- non-corrosiveness towards materials employed for the
construction of machinery and especially those used for gaskets and
seals, as well as metals such as steel, cast iron, copper and bronze;
- demulsibility: they separate rapidly from water and thus ensure
perfect lubrication even in applications where water contamination is
possible, as in steelmaking plants, for instance;
- rust protection properties: these oils effectively help, protect and conserve lubricated parts even in damp conditions;
- very low tendency to foaming to ensure a very good lubricating film.
|
P R O D U C T D A T A S H E E T
The AGIP BLASIA FMP series are very high performance gear oils for lubricating in extreme pressure conditions
(EP) the last generation industrial gear reducers, in particular, those extremely compact and of high specific power that
could have problems of micropitting damages.
They are formulated with selected paraffinic base stocks and specific additives for a very wide operative exigencies,
(ISO-L-CKD classification).
CHARACTERISTICS (TYPICAL FIGURES)
BLASIA FMP 100 150 220 320 460
Viscosity at 40°C mm²/s 97 150 221 318 446
Viscosity at 100°C mm²/s 10.7 14.6 18.8 23.9 29.7
Viscosity Index - 96 95 95 95 95
Flash Point COC °C 230 235 260 265 280
Pour Point °C -24 -21 -21 -18 -12
Mass density at 15°C kg/l 0.887 0.889 0.893 0.897 0.900
PROPERTIES AND PERFORMANC
AGIP BLASIA FMP oils have very good antiwear and EP properties as demonstrated by the following tests:
• FZG (A 8,3/90), scuffing test: pass the 12th stage;
FZG (FVA 54) – micro pitting test, load stage > 10th;
FAG FE 8 (DIN 51819-3), wear of rollers: 2mg;
Timken OK load (ASTM D 2782), 70 lbs;
4 balls EP (ASTM D 2783), last non-seizure load: 110 kg; welding load: 280kg.
AGIP BLASIA FMP oils also possess the following properties:
thermal and oxidation stability, permitting continuous use at operating temperatures as high as 120 °C;
non-corrosiveness towards materials employed for the construction of machinery and especially those used for
gaskets and seals, as well as metals such as steel, cast iron, copper and bronze;
demulsibility: they separate rapidly from water and thus ensure perfect lubrication even in applications where
water contamination is possible, as in steelmaking plants, for instance;
rust protection properties: these oils effectively help, protect and conserve lubricated parts even in damp
conditions;
very low tendency to foaming to ensure a very good lubricating film.
AGIP BLASIA FMP
Eni S.p.A.
Refining & Marketing Division
Via Laurentina 449, 00142 Rome
Standard Phone +39 06 5988.1
www.eni.com
[IN346.04.10]
Page 2 of 2
P R O D U C T D A T A S H E E T
APPLICATIONS
AGIP BLASIA FMP oils are recommended for splash or circulation lubrication of all types of enclosed gears,
especially where operating conditions involve heavy loads, high speeds and high relative sliding velocities, at elevated
ambient and operating temperatures in industrial and marine applications. They can also be used to lubricate other
heavily-loaded parts and components such as couplings, transmission screws and low speed plain and rolling bearings.
As indicated, they can be used, too, in oil-mist lubrication systems.
SPECIFICATIONS
AGIP BLASIA FMP oils are approved and/or met the requirements of the following specifications:
ISO-L-CKD
ISO 12925-1 - CKD
ANSI/AGMA 9005-D94 (AGMA 3EP, 4EP, 5EP, 6EP e 7EP)
ASLE EP
CINCINNATI MILACRON (P-77 ISO 150, P-74 ISO 220,P-35 ISO 460) level.
DAVID BROWN S1.53.101 level
DIN 51517 teil 3 – CLP
FLENDER BA 7300 Table A (ISO VG 150, 220, 320 e 460)
Müller Weingarten DT 55 005 type CLP level
U.S. STEEL 224
